BANJO

  • (1 đánh giá)
  • Nhà sản xuất: Modec

Nơi sản xuất: Pháp

Giá: Gọi liên hệ

Lượt xem: 34

Đặt mua ngay

Essential for all rising stem handwheels, the Standard duty banjo drive head caters for all stems up to a maximum diameter of 63mm (2.48’’). It can also operate all clamping systems for handwheel and other interfaces.

Tư vấn và hỗ kỹ thuật

Bảo hành ít nhất 12 tháng theo tiêu chuẩn NSX

Hotline

0988 737 147

Liên hệ báo giá

Đánh giá của bạn về sản phẩm này:

Sản phẩm cùng danh mục

Tài liệu tham khảo

Thông tin sản phẩm

Banjo: For rising stem valves. Available in standard and heavy duty

What’s more, it brings additional reduction which means you can multiply the actuator’s torque by 4 and reduce the speed by the same factor. Perfect for difficult or stiff handwheels.

With a maximum torque of 600 Nm (440 lb.ft), the Standard duty banjo head can be mounted quickly and easily on all Easy duty actuators and on some standard duty actuators (see product files).

Reference : BJH01

The Heavy duty banjo drive head should be used for very high torques. It caters for rising stems up to a maximum diameter of 70mm (2.75’’) and is compatible with all clamping systems for handwheel and other interfaces. It brings additional reduction which means you can multiply the actuator’s torque by 3 and reduce the speed by the same factor.

With a maximum torque of 1000 Nm (740 lb.ft), the Heavy duty banjo head can be mounted quickly and easily on all Easy duty and Standard duty actuators as well as some Heavy duty ones.

Reference : BJH02

Scroll