Pressure Regulator Type TA-630

Specially designed to be used at commercial or industrial installations. Accepts inlet pressure up to 25 bar and outlet pressure from 0.020 up to 0.5 bar.

Series TA-200 pressure regulators are specially designed to be used at industrial and commercial installations where high gas consumption with minimum variations in outlet pressure is required

TA-625 pressure regulator have been designed to operate with inlet pressure up to 25 bar and regulated outlet pressure between 0.35 bar and 4 bar.

TA-627 pressure regulator have been designed to operate with inlet pressure up to 25 bar and regulated outlet pressure between 0.35 bar and 4 bar.

TA-631 is a pressure regulator similar to TA-630, differentiating from it in that its pilot pressure is discharged to the regulator’s output and in that it is equipped with a spring that stops the flow whenever it falls to cut off levels or the pilot losses pressure.

The TA-722 Pressure Regulator can be used for direct service (single stage regulator) and for first and second stage regulatiors, either for small installations or for industries.

956 Series of gas pressure regulators for high and medium pressure is a fully modular range of gas pressure regulators and SSV. The system is made around a top and bottom entry body that is capable of housing up to three different functions each equipped with its own pilots, seats and shutter.

High capacity direct action regulator.

High capacity direct action regulator.
Connections: Flanged
End Connections: ANSI 150 RF 20.3 barg

Pressure Regulators, Anti Freeze Pre-Pilot, Safety Relief Valves

TA935 family of axial flow pressure regulators were designed in order to meet the requirement of several markets where the advantages and features of axial type pressure regulators are appreciated.

The TA950 series pressure regulators are direct acting spring loaded regulator type, controlled by a diaphragm and counter spring.

The Tormene TA 956 DFOL is a Fail Open type pressure regulator, this means that the main valve will move to the fully open position in the event of a diaphragm rupture of the main valve, rupture of pilot diaphragm or supply pressure to pilot is not available.

The TA-956 E Control Valve is a dedicated control valve for gas applications.

TA992SH pressure regulators are of the direct action type equipped with a pressure loaded static head as counter-balancing force to the diaphragm. The valve is fully balanced for higher accuracy and rangeability.