SPOKE ADAPTORS

  • (1 đánh giá)
  • Nhà sản xuất: Modec

Nơi sản xuất: Pháp

Giá: Gọi liên hệ

Lượt xem: 26

Đặt mua ngay

The spoke adaptors clamp solidly and quickly to the handwheel and can turn in both directions, with or without a rising stem.
 

Tư vấn và hỗ kỹ thuật

Bảo hành ít nhất 12 tháng theo tiêu chuẩn NSX

Hotline

0988 737 147

Liên hệ báo giá

Đánh giá của bạn về sản phẩm này:

Sản phẩm cùng danh mục

Thông tin sản phẩm

It is available in two versions – one that adapts to flat or slightly tapered (< 30°) handwheels; a second for tapered handwheels (> 30°).

The adaptor has a strong hold on the handwheel and also fixes firmly to the actuator, providing complete safety during  manoeuvres, even in difficult positions.

These adaptors save a significant amount of time and money as there’s no need to buy and install a drive plate for each handwheel.

1. Spoke adaptors for flat handwheels:

These adaptors should be used for flat or slightly tapered handwheels (spokes at an angle < 30° in relation to the wheel’s plane).

A choice of two models are available according to the number of spokes in the handwheel you want to turn.

These adaptors can be used with a straight or right angle actuator  KTA002 , and with a banjo head in conjunction with the TTA002 interface.

2. Spoke adaptors for tapered handwheels:

These adaptors should be used for tapered handwheels with spokes at an angle greater than 30° in relation to the wheel’s plane. A choice of six models are available according to the number of spokes in the handwheel you want to turn.

These adaptors can be used with a straight or right angle actuator due to the KTA002, and with a banjo head in conjunction with the TTA002 interface.

These adaptors save a significant amount of time and money as there’s no need to buy and install a drive plate for each handwheel.

Scroll