FILTERS AND SEPARATORS, GAS METERING, GAS PRESSURE AND REGULATORS23 products

The cartridge filters can guarantee an high filtration capacity and a low pressure drop. These filters use synthetic cartridges with a 100% efficiency for particles > than 3 microns and 99% for particles between 0,5 and 3 microns.

They are normally used at the inlet of City Gates or Gas Metering and Reducing stations. Their efficiency depends on the type of contaminants; solid particles higher than 3 microns and up to 5 microns for liquid particles.

Cyclones filters can be used to separate water, hydrocarbons, sand and dust coming from the pipeline for the following services: Natural Gas extraction, Gas transportation, Gas metering, Gas compression.

Specially designed to be used at commercial or industrial installations. Accepts inlet pressure up to 25 bar and outlet pressure from 0.020 up to 0.5 bar.

Series TA-200 pressure regulators are specially designed to be used at industrial and commercial installations where high gas consumption with minimum variations in outlet pressure is required

Tormene Americana’s heat exchangers are designed in order to increase the temperature of Natural Gas, Air, LPG, etc. Its principle is based on the thermal exchange between water or steam and the fluid to be treated.

Indirect water bath heaters have a wide variety of applications in the oil and gas, gas processing and gas distribution industry.

Liquid and Dust Separators are used in Gas Reducing and Metering stations, Storage plants, Compression plants, etc.

TA-625 pressure regulator have been designed to operate with inlet pressure up to 25 bar and regulated outlet pressure between 0.35 bar and 4 bar.

TA-627 pressure regulator have been designed to operate with inlet pressure up to 25 bar and regulated outlet pressure between 0.35 bar and 4 bar.

TA-631 is a pressure regulator similar to TA-630, differentiating from it in that its pilot pressure is discharged to the regulator’s output and in that it is equipped with a spring that stops the flow whenever it falls to cut off levels or the pilot losses pressure.

TA-630 Pressure Regulators have been designed to operate with inlet pressure up to 105 bar, and regulated pressure between 0.21 bar and 4 bar (with 5inch diaphragms) and 1.5 bar up to 14 bar (with 2.1/2inch diaphragms).