TORQUE LIMITER

  • (1 votes)
  • Manufacturer: Modec

Made in: France

Price: Call us

Views: 383

Buy now

All our portable valve actuators are equiped, or can be equiped as an option, with an adjustable torque limiter to protect equipment and operators from the risks associated with applying too much torque.

This also ensures that a minimum torque has been applied by the device.

Advice and Support

Warranty of at least 12 months according to manufacturer standards

Hotline

090 997 5120

Contact for quote

Vote product:

Same product category

References

Description

The torque Limiter is available as an option for actuators PY68 and HL83.
The JA73E have a built-in electronic torque limiter as standard.

 
  • As the JA73 rotational speed is constant, a change in power results in a proportional change in maximum torque.

    Therefore, by setting the power to one of the 4 available levels, the maximum torque of the actuator is adjusted to a limit.

    The following table shows the maximum torque values for the different JA73 models depending on the selected power level:

    Without drive head Power levels - Max torque (Nm)
    1 2 3 4
    JA73E-023 6 16 30 44
    JA73S-077 20 55 100 150
    JA73S-132 35 95 170 250
    JA73H-169 45 120 220 320
    JA73H-309 80 220 400 590
    JA73H-564 140 390 720 1080*

    * Max 1000 Nm

    With RA30 Power levels - Max torque (Nm)
    1 2 3 4
    JA73E-023 6 16 30 44
    JA73S-077 20 55 100 150
    JA73S-132 35 95 170 250
    JA73H-169 45 120 220 320
    JA73H-309 80 220 400 590
    JA73H-564 140 390    

    * Max 600 Nm (442 lb.ft)

    With banjo head BJH01 Power levels - Max torque (Nm)
    1 2 3 4
    JA73E-023 25 65 120 175
    JA73S-077 80 220 400 600
    JA73S-132 140 380    
    JA73H-169 180 480    
    JA73H-309 320      
    JA73H-564 560      

    * Max 600 Nm (442 lb.ft)

    With banjo head BJH02 Power levels - Max torque (Nm)
    1 2 3 4
    JA73E-023 20 50 90 130
    JA73S-077 60 160 300 450
    JA73S-132 100 280 510 750
    JA73H-169 130 360 660 970
    JA73H-309 240 660    
    JA73H-564 420      

    * Max 1000 Nm

    With Torque multiplier Power levels - Max torque (Nm)
    1 2 3 4
    JA73E-023 22 59 111 163
    JA73S-077 74 204 371 557
    JA73S-132 130 353 631*  
    JA73H-169        
    JA73H-309        
    JA73H-564        

    * Max 600 Nm (442 lb.ft)

    Forbidden
  • For each of the four speed levels (selected by the button on the top of the unit), the maximum torque can be set with the knob at the foot of the handle at the back of the actuator.

    The matrices below show the maximum speed and torque values for each of the selected combinations.

    An audible signal (two beeps) sounds and the actuator stops when the set torque is reached. The tool will restart only after the on/off switch is released and pressed again.

    • Straight or with RA30 Torque settings 1 2 3 4 5
      Speed settings
      1 VMax (RPM) 26 29 34 37 41
      CMax (Nm) 17 54 89 129 165
      2 VMax (RPM) 41 46 52 57 61
      CMax (Nm) 16 49 82 116 153
      3 VMax (RPM) 126 147 168 188 209
      CMax (Nm) 4 16 29 40 53
      4 VMax (RPM) 195 223 258 279 314
      CMax (Nm) 3 11 19 29 37
      With banjo head BJH01 Torque settings 1 2 3 4 5
      Speed settings
      1 VMax (RPM) 6.5 7.3 8.4 9.2  
      CMax (Nm) 69 218 355 516  
      2 VMax (RPM) 10 12 13 14 15
      CMax (Nm) 63 195 327 464 613
      3 VMax (RPM) 31 37 42 47 52
      CMax (Nm) 17 63 115 160 212
      4 VMax (RPM) 49 56 65 70 79
      CMax (Nm) 11 43 77 115 149
      With banjo head BJH02 Torque settings 1 2 3 4 5
      Speed settings
      1 VMax (RPM) 9 10 11 12 14
      CMax (Nm) 52 163 256 387 490
      2 VMax (RPM) 14 15 17 19 20
      CMax (Nm) 57 146 245 348 460
      3 VMax (RPM) 42 49 56 63 70
      CMax (Nm) 12 47 86 120 159
      4 VMax (RPM) 65 74 86 93 105
      CMax (Nm) 8 32 58 86 112
      With Torque multiplier Torque settings 1 2 3 4 5
      Speed settings
      1 VMax (RPM) 7 8 9 10 11
      CMax (Nm) 64 202 329 478 611
      2 VMax (RPM) 11 12 14 15 17
      CMax (Nm) 58 181 303 430 569
      3 VMax (RPM) 34 40 45 51 56
      CMax (Nm) 15 58 106 149 197
      4 VMax (RPM) 53 60 70 75 85
      CMax (Nm) 11 40 72 106 138
      Forbidden
    • Straight or with RA30 Torque settings 1 2 3 4 5
      Speed settings
      1 VMax (RPM) 8 9 10 11 12
      CMax (Nm) 60 180 300 430 550
      2 VMax (RPM) 12 14 15 17 18
      CMax (Nm) 50 160 270 390 515
      3 VMax (RPM) 38 44 51 57 63
      CMax (Nm) 13 50 100 140 175
      4 VMax (RPM) 58 67 77 84 94
      CMax (Nm) 10 35 65 95 125
      With banjo head BJH01 Torque settings 1 2 3 4 5
      Speed settings
      1 VMax (RPM) 2        
      CMax (Nm) 240        
      2 VMax (RPM) 3        
      CMax (Nm) 200        
      3 VMax (RPM) 10 11 13 14  
      CMax (Nm) 52 200 400 560  
      4 VMax (RPM) 15 17 19 21 24
      CMax (Nm) 40 140 260 380 500
      With banjo head BJH02 Torque settings 1 2 3 4 5
      Speed settings
      1 VMax (RPM) 3 3 3    
      CMax (Nm) 180 540 900    
      2 VMax (RPM) 4 5 5    
      CMax (Nm) 150 480 810    
      3 VMax (RPM) 13 15 17 19 21
      CMax (Nm) 39 150 300 420 525
      4 VMax (RPM) 19 22 26 28 31
      CMax (Nm) 30 105 195 285 375
      With Torque multiplier Torque settings 1 2 3 4 5
      Speed settings
      1 VMax (RPM) 2        
      CMax (Nm) 223        
      2 VMax (RPM) 3 4      
      CMax (Nm) 186 594      
      3 VMax (RPM) 10 12 14 15  
      CMax (Nm) 48 186 371 519  
      4 VMax (RPM) 16 18 21 23 25
      CMax (Nm) 37 130 241 352 464
      Forbidden
    • Without drive head Torque settings 1 2 3 4 5
      Speed settings
      1 VMax (RPM) 5 6 7 7 8
      CMax (Nm) 90 280 460 660 850
      2 VMax (RPM) 8 9 10 11 12
      CMax (Nm) 80 250 420 600 790
      3 VMax (RPM) 25 29 33 37 41
      CMax (Nm) 20 80 150 210 270
      4 VMax (RPM) 38 44 50 55 61
      CMax (Nm) 15 55 100 145 190
      With RA30 Torque settings 1 2 3 4 5
      Speed settings
      1 VMax (RPM) 5 5.8 7    
      CMax (Nm) 90 280 460    
      2 VMax (RPM) 8 9 10 11  
      CMax (Nm) 80 250 420 600  
      3 VMax (RPM) 25 29 33 37 41
      CMax (Nm) 20 80 150 210 270
      4 VMax (RPM) 38 44 50 55 61
      CMax (Nm) 15 55 100 145 190
      With banjo head BJH01 Torque settings 1 2 3 4 5
      Speed settings
      1 VMax (RPM) 1        
      CMax (Nm) 360        
      2 VMax (RPM) 2        
      CMax (Nm) 320        
      3 VMax (RPM) 6 7 8    
      CMax (Nm) 80 320 600    
      4 VMax (RPM) 10 11 13 14  
      CMax (Nm) 60 220 400 580  
      With banjo head BJH02 Torque settings 1 2 3 4 5
      Speed settings
      1 VMax (RPM) 2 2      
      CMax (Nm) 270 840      
      2 VMax (RPM) 3 3      
      CMax (Nm) 240 750      
      3 VMax (RPM) 8 10 11 12 14
      CMax (Nm) 60 240 450 630 810
      4 VMax (RPM) 13 15 17 18 20
      CMax (Nm) 45 165 300 435 570
      With Torque multiplier Torque settings 1 2 3 4 5
      Speed settings
      1 VMax (RPM) 1        
      CMax (Nm) 334        
      2 VMax (RPM) 2        
      CMax (Nm) 297        
      3 VMax (RPM) 7 8 9    
      CMax (Nm) 74 297 557    
      4 VMax (RPM) 10 12 13 15  
      CMax (Nm) 56 204 371 540  
      Forbidden
  • On these actuators, the torque limiter is an option that disconnects the motor from the gearbox when the torque limit is reached. The actuator head then has no residual torque applied.

    The operator can change the torque limit over a range of +/- 40% of the median value. The following tables show the maximum torque setting ranges for each actuator model selected :

    Without drive head Reduction ratio Free speed - 6.2 bars (RPM) Max torque (Nm)
    Min Max
    PY68E-031-03/05 1:31 305 20 45
    PY68S-087-03/05 1:40 218 25 60
    PY68S-148-03/05 1:61 155 40 90
    PY68H-192-03/05 1:227 42 140 340
    PY68H-293-03/05 1:293 32 180 440
    PY68H-641-03/05 1:641 15 400 960
    With RA30 Reduction ratio Free speed - 6.2 bars (RPM) Max torque (Nm)
    Min Max
    PY68E-031-03/05 1:31 305 20 45
    PY68S-087-03/05 1:40 218 25 60
    PY68S-148-03/05 1:61 155 40 90
    PY68H-192-03/05 1:227 42 140 340
    PY68H-293-03/05 1;293 32 180 440
    PY68H-641-03/05 1:641 15 400  
    With BJH01 Reduction ratio Free speed - 6.2 bars (RPM) Max torque (Nm)
    Min Max
    PY68E-031-03/05 1:124 76 80 180
    PY68S-087-03/05 1:160 54 100 240
    PY68S-148-03/05 1:244 38 160 360
    PY68H-192-03/05 1:908 10    
    PY68H-293-03/05 1:1172 8    
    PY68H-641-03/05 1:2564 4    
    With BJH02 Reduction ratio Free speed - 6.2 bars (RPM) Max torque (Nm)
    Min Max
    PY68E-031-03/05 1:162 101 60 135
    PY68S-087-03/05 1:381 72 75 180
    PY68S-148-03/05 1:597 51 120 270
    PY68H-192-03/05 1:774 14 420  
    PY68H-293-03/05 1:879 10 540  
    PY68H-641-03/05 1:1692 5    
    With Torque multiplier Reduction ratio Free speed - 6.2 bars (RPM) Max torque (Nm)
    Min Max
    PY68E-031 1:115 82 74 167
    PY68S-087 1:148 59 93 223
    PY68S-148 1:226 42 148 334
    PY68H-192 1:842 11    
    PY68H-293 1:1087 9    
    PY68H-641 1:2378 4    
    Forbidden
Scroll