Fixed fingers adaptors

FINGERS TYPE ADAPTORS

This exclusive patented system is the simplest and most effective for clamping on to flat or slightly taperedhandwheels.

No need to pre-install drive plates on the handwheel before use. The fingers type adaptors fix simply on to the portable actuator head, and can then be used to turn every handwheel that has the same number of spokes. It takes less than a minute to change the adaptor. It can also be used for rising stem valves (if used with a banjo head).

These adaptors save a significant amount of time and money as there’s no need to buy and install a drive plate for each handwheel.

FIXED FINGERS ADAPTORS (SUAxxx)

If used with a banjo head, fingers can also be screwed directly on to the head (maximum 5 fingers in that case), leaving space for the rising stem to pass through.

In case of use with a straight or angled head, it is advisable to use a plate on which the fingers are screwed.

In this case, you must also use the KPA004 interface which attaches the plate to the actuator head. This plate can also be used directly with the banjo head.

Specifications

Reference	Weight (Kg)	Max torque (Nm)
		3 fingers	4 fingers	5 fingers	6 fingers	7 fingers
SUA001	0.3	350	1000	1000	1000	1000
SUA901	0.2	350	1000	1000	1000	1000
SUA002	2.5	350	1000	1000	1000	1000
SUA801	0.1	150	150	N/A	N/A	N/A
SUA034	0.8	150	150	N/A	N/A	N/A
SUA007	5.2	1000	1000	1000	1000	1000

 

Layout

FINGERS USED DIRECTLY ON A BANJO HEAD :

3 X SUA001

4 X SUA001

5 X SUA001

 

FINGERS USED ON A DRIVE PLATE

SUA001/SUA901

Finger for BJH or SUA002

SUA002

Ø 300 mm Drive plate

SUA034

Ø 900 mm Drive plate

SUA801

Single finger for SUA034 drive plate

SUA007

1 Drive plate SUA002 +7 fingers SUA001

SUA034

1 Platine Ø 190 mm +4 doigts SUA001

For your comfort and safety, please carefully read the instruction manual before using the portable valve actuator.