Self-adjusting and self-centering fingers adaptors

FINGERS TYPE ADAPTORS

This exclusive patented system is the simplest and most effective for clamping on to flat or slightly taperedhandwheels.

No need to pre-install drive plates on the handwheel before use. The fingers type adaptors fix simply on to the portable actuator head, and can then be used to turn every handwheel that has the same number of spokes. It takes less than a minute to change the adaptor. It can also be used for rising stem valves (if used with a banjo head).

These adaptors save a significant amount of time and money as there’s no need to buy and install a drive plate for each handwheel.

SELF-ADJUSTING AND SELF-CENTERING FINGERS ADAPTORS (SAxxx)

This adaptor should be selected for flat or slightly tapered handwheels (spokes at an angle of < 10° in relation to the wheel’s plane).

It fixes directly on to the banjo head, and via a KPA003, KPA004 or KPA005 interface on the standard splined shaft of the straight and right angle actuators. To avoid scratching the handwheel, use the protectors SA103/104/105/107.

These adaptors save a significant amount of time and money as there’s no need to buy and install a drive plate for each handwheel.

Specifications

Reference	Weight (Kg)	Max torque (Nm)	Interfaces for straight and right angle heads
SA003	2.3		350	KPA003
SA004	4.1	1000	KPA004
SA005	4.4	1000	KPA005
SA006	5.6	1000	KPA005
SA007	5.9	1000	KPA005

 

Layout

SA003

For 3 or 6 spokes handwheels

SA004

For 2 or 4 spokes handwheels

SA005

For 5 spokes handwheels

SA006

For 6 spokes handwheels

SA007

For 7 spokes handwheels