Spoke adaptors for tapered handwheels

Spoke adaptors

The spoke adaptors clamp solidly and quickly to the handwheel and can turn in both directions, with or without a rising stem. It is available in two versions – one that adapts to flat or slightly tapered (< 30°) handwheels; a second for tapered handwheels (> 30°).

The adaptor has a strong hold on the handwheel and also fixes firmly to the actuator, providing complete safety during manoeuvres, even in difficult positions.

These adaptors save a significant amount of time and money as there’s no need to buy and install a drive plate for each handwheel.

Spoke adaptors for tapered handwheels

Different models available depending on the number of handwheel spokes to operate.

These adaptors can be used with a straight or right angle actuator due to the KTA002, and with a banjo head in conjunction with the TTA002 interface.

These adaptors save a significant amount of time and money as there’s no need to buy and install a drive plate for each handwheel.

Specifications

Reference	Weight (Kg)	Max torque (Nm)	A (mm)
CSBxxx-20	4.2		1000	201
CSBxxx-30	5.4	1000	401
CSBxxx-60	6.6	1000	601

 

Layout

CSB003-20

For 3 or 6 spokes handwheels

CSB004-20

For 2 or 4 spokes handwheels

CSB005-20

For 5 spokes handwheels

The CSB adapters require the KTA002 interface with a straight output
or with an angled output, or the TTA002 with a hollow head.