BVT-DLH Steam attemperator with floating liner

  • (1 đánh giá)
  • Nhà sản xuất: BVT

Nơi sản xuất: Thụy Điển

Giá: Gọi liên hệ

Lượt xem: 50

Đặt mua ngay

Attemperation is the process of controlling the amount of superheat in a boiler or a Heat Recovery Steam Generator (HRSG). Spray water is injected into the superheated steam, reducing its temperature. Spray water flow is controlled by an external water control valve and injected perpendicular to the steam flow using a series of spring-loaded spray water atomizing nozzles. The steam pipe is protected from thermal stresses by a floating liner which also acts as a flow profiler, increasing the relative steam velocity near the nozzles and improving evaporation.
The floating liner is installed without any welding, allowing it to move with the expansion of the material, making it more resistant to cycling.

Tư vấn và hỗ kỹ thuật

Bảo hành ít nhất 12 tháng theo tiêu chuẩn NSX

Hotline

0988 737 147

Liên hệ báo giá

Đánh giá của bạn về sản phẩm này:

Sản phẩm cùng danh mục

Tài liệu tham khảo

Thông tin sản phẩm

Specifications
Nozzle material
Inconel 718
Rangeability
Determined by spray water valve
Design pressure
Steam - 200 bar(g) 
Water - 320 bar(g)

Design temperature
Steam - 630 °C 
Water - 250 °C

Cycling 
Up to 6300 cycles / 25 years 
Installation 
Horizontal installation or vertical with steam flowing upwards is recommended.

Scroll